D-GC8Q FUEL DISPENSER

D-GC8Q FUEL DISPENSER

FlowMeter Type :Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 425kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 26

’t shut. Check valve can’t open fully as amount of waste at the lower fuel dispenser part of outlet valve of vapor separator. Upper cover gasket of vapor separator is broken, leads to pressure not enough. 3.5. Pipeline is jammed and bottom valve could not fully open. Serious fluctuation and noise in operation Jammed filter net and too long or too thin pipeline cause heavy loan making big noise. Locked overflow valve or too tight adjusting bolt. Jammed vane causes serious oil fluctuation Pipeline vibrates heavy. Delivery frequency is same to inherent mechanical frequency. instable flow rate as starting Overflow valve works abnormally. Pipeline has U shape curve, generating air resistance. Pipe valve has some trouble. Contain foam in flowing oil Pipe and bottom valve trouble because of ceaseless exhausting air in vapor separator. Exhausting pipe inhales air. Inspect check valve and cone-shaped valve. Vapor separator’s outlet valve and exhausting valve is jammed leading to fail to separate air from oil. Accuracy beyond scope Double optical board is broken in pulse sensor, which leads to countable pulse lost. fuel dispenser Inner leakage in measurement transducer causes accuracy beyond range. Change new transducer. As insufficient capacity of vapor separator, check outlet valve and exhausting pipe. Fuel dispenser’s main board is broken, which also lead to inaccuracy. Pipeline leakage causes vapor separator lost function. Motor rotates slowly and become hot as refueling Motor has been destroyed. Winding short circuit or disconnected; fuel dispenser starting capacitor has been damaged in single phase motor; Control circuit of motor is broken, which leads to starting problem. Exterior wiring also cause motor failure, (absent electric phase, long wiring distance, too thin lead, much lower voltage) Oil overflowing in exhausting pipe Small floater is damaged and dropped down in vapor separator. Large amount of oil flow into vapor separating chamber; oil is discharge from exhausting pipe as return valve trouble

FP2_1.88　　 COMMUNICATION S fuel dispenser PECIFICATION　　 Page: 7　　 Different points can be considered in the document to describe the exchanged　　 messages:　　 - messages between the Originator Application and the Originator Communication　　 layers　　 - messages on the network　　 - messages between the Recipient Communication layers and the Recipient　　 Application.　　 For interoperability reasons only the message on the network have to be considered　　 but for explanations it is sometime useful to also consider the interface between the　　 Application (layer 7) and the Communication (layers 1 to 6).　　 Originator Originator Recipient Recipient　　 Application Communication Communication Application　　 layer 7 layers (1-6) layers (1-6) layer 7　　FP2_1.88 fuel dispenser IFSF STANDARD FORECOURT PROTOCOL December 2004　　 COMMUNICATION SPECIFICATION　　Page: 8　　2 Communication Principles　　 The transport layer for an IFSF network may be either a Lonworks based network　　 architecture or a system based on TCPIP. The TCPIP specification is given in Part　　 2.II. This document describ fuel dispenser es the implementation over LonWorks. The application　　 layer defined by the IFSF is independent of the transport layer used.　　2.1 LON Features　　 The LON component selected to provide the ISO communications layers 1 to 6 is　　 already used in the building wiringservices business. The very large usage of this　　 component offers a powerful solution at an acceptable cost.　?

ompetition from out of town did them more good than harm; their returns fuel dispenser on equity were higher if they were up against banks that were big, served many markets or both. In the second period, though, the effect was reversed. In other words, between the 1980s and 1990s bank consolidation became less hubristic and more efficient, to the detriment of small, local banks—thanks, say the authors, largely to developments in technology. It appears that local banks suffered both lost revenues, as the interlopers stole their fees and interest on loans, and also higher costs, as they offered higher deposit rates or spent more on advertising or service to keep hold of their customers. Looking at an alternative measure of local banks profitability, the authors suggest that their competitors became sharper at serving several markets, rather than exploiting sheer scale. Another recent study�provides finer detail. Timothy Hannan and Robin Prager, both of the Federal Reserve, find that increased competition from multi-market institutions has had markedly different effects in rural and urban areas. Looking at returns on assets fuel dispenser and equity between 1996 and 2003, they conclude that the profitability of local banks serving single rural markets was dented by the presence of more broadly based competitors. Similar banks in urban districts, however, were unaffected. As the authors note, this may not be too surprising. Rural markets tend to be more concentrated than urban ones and the banks that served them enjoyed far higher returns than their city- fuel dispenser dwelling counterparts. There is therefore more profit for competitors to feed on. Moreover, the impact in rural areas was greater, the more concentrated the market. The smaller the bank, the harder it was hit by competition from outside. The outsiders did most damage by causing local banks non-interest income to decline and their bad-loan provisions to rise. This indicates that they beat local banks in winning fee income and were able to cherry- pick the safest b