K-G22Q FUEL DISPENSER

K-G22Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

oil, so as to reduce the volume of drained oil. Turn adjusting bolt clockwise to reduce discharge, anticlockwise to increase discharge. Therefore, changing the position of bolt enable discharge approach academic volume and reach the requirements on measurement transducer of national appraisal regulations. As two regulat fuel dispenser ive bolts access to adjusting piston, the adjusting discharge in a circulation per bolt can be calculated in the following formula: △V = 1/2πd12 nt (2--4 ) △V ── adjusting value in per circulation; D1 ── diameter of regulative piston; n ── turning number of adjusting bolt; t ── screw- pitch of adjusting bolt. There is another metal piston measurement transducer in current market. See the Diagram 2-19. Regulative piston is singularly installed in piston rather than connect with rod in this model. Its adjusting value in terms of per adjusting bolt is: △V = 1/4πd2 nt (2--5 ) Common failure and Troubleshooting Metal piston measurement transducer has the two common failures --- accuracy decline and mechanical trouble. Measure accuracy beyond scope The allowed measurement accuracy of fuel dispenser is ±0.3 %, repeated tolerance no more than 0.15 % according to the stipulation of JJG443-98 Fuel dispenser. The maximum allowed tolerance of min. measured valve don’t exceed ±0.5 %，its repeated tolerance no more than 0.25 %. The ratio of maximum flow (Q max.) to minimum flow (Q min.) is 10 to 1. as fuel dispenser leave factory. The ratio should not be less than 5: 1 in inspecting at operation locale. Al fuel dispenser l of exceeded tolerance is regarded as beyond measurement accuracy. There are many elements and reasons resulting in measurement accuracy beyond scope, including unstable hydraulic system (extensive pressure fluctuation), electric system failure, thick colloid in frictional interface, measurement transducer abrasion, etc. The last two reasons will mainly be introduced in this article. Regulating adjusting fuel dispenser

approval.　　 MANUFACTURER OIL COMPANY SPECIFIC　　 200　　 to Free to the manufacturer oil company　　 255　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 82　　3.4 fuel dispenser Meter Data　　This data allows the CD to configure a meter in the calculator.　　The access to the meter data is done by the database address M_ID (meter identification).　　The M_ID = 80H is used to ask for all meters.　　Please note that to allow dispensers to operate in stand alone mode the dispenser must have　　default settings for some of the Data_Id s contained in this database i.e. the dispenser must　　configure these Data_Id s itself after a master resetcold start.　　 METER DATABASE　　 DB_Ad = M_ID (81H-90H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 CONFIGURATION　　 1 Bin8 R(1-9) O　　 Meter_Type　　 (01H) (0-2) W(1-2)　　 Specifies the meter type:　　 0 = not configured If this Data_Id has not be fuel dispenser en configured　　 then the dispenser should use its default value.　　 1 = normal speed　　 2 = high speed　　 PCD Comment:　　 As this is an optional data field the PCD can NAK any　　 write requests to this Data_Id with a Data_ACK code of 4　　 (Data does not exi fuel dispenser

d-war stereotypes. But the fact that people jumped to this conclusion says much about the image created by Mr Putin s capricious seven-year presidency. Nor is it an entirely outlandish view. Many in the FSB reviled Litvinenko some are rumoured to have used his image as a target on their shooting ranges. Before and fuel dispenser after leaving Russia in 2000, Litvinenko accused his erstwhile colleagues—and Mr Putin, the agency s former boss—of horrific crimes. His key allegation (and not his alone) was that the FSB orchestrated the spate of mysterious bombings of Russian apartment blocks in 1999, which killed about 300 people and were officially blamed on Chechen terrorists. The blasts contributed to the eruption of a new Chechen war, which in turn helped to secure Mr Putin s election as president in 2000. For many of Mr Putin s critics, the apartment bombings are the original sin of his presidency, an extreme encapsulation of a pattern that includes the ruthless accumulation of power and the supremacy of power over law. The charge is denied, of course, but it is undeniable that several journalists, parliamentarians and policemen who have investigated the bombings have either met unexplained deaths or gone to prison. Some see Litvinenko s death as part of a sequence of recent murders that included the contract killing in October of Anna Politkovskaya, a crusading journalist who exposed the continuing but now largely forgotten abuse of human rights in Chechnya. Mr Putin at first ignored her murder, then posthumously belittled her work. Others see a link to the poisoning of Viktor fuel dispenser Yushchenko during his campaign (against the Kremlin s preferred candidate) for Ukraine s presidency in 2004. That, too, remains unexplained� because, some in Kiev whisper, explaining it would be diplomatically awkward. A sub-theory is that Litvinenko died not on Mr Putin s direct order, but through a freelance vendetta pursued by current or former security agents. One of the stark contradictions of the Putin years has fuel dispenser