K-GA FUEL DISPENSER

K-GA FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

e hydraulic pulse so as to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable --- pressure pulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pump inle fuel dispenser t is not always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be brought two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more often. The Article 6.2.6 in GB50156-2002 the Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to reduce pressure and electricity loss, and to decl fuel dispenser fuel dispenser

length could be 0 (e.g. commands without data)　　 appli- appli- Data Element Contents　　 Data_El　　 cation cation - the contents of the second application data　　 dependent dependent element which shall be sent　　 媴　　 bin8 1 to 255 Data Identifier　　 Data_Id　　 - the identifier for the last application data　　 fuel dispenser element which shall be sent　　 bin8 0 to 254 Data Length　　 Data_Lg　　 or or - number of bytes for the contents of the last　　 bin8 bin16 255 application data element　　 1　　 0 - 65535 - if the length is bigger than 254 see - the　　 length could be 0 (e.g. commands without data)　　 appli- appli- Data Element Contents　　 Data_El　　 cation cation - the contents of the last application data element　　 dependent dependent which shall be sent　　FP2_1.90 IFSF STANDARD FORECOURT PROTOCOL February 2006　　 COMMUNICATION SPECIFICATION　　Page: 24　　 1　　 For data longer than 254 bytes the Data_Lg will have the value 255 and the 2 following bytes　　 indicate the data length　　 These messages are generated by the application but the actual recipient addresses of　　 the messages are generated by the communication layer by using the　　 Recipient_Addr_Table. For more details see chapter 4.5.　　 T fuel dispenser fuel dispenser

and Syrian rockets and missiles. With these as a deterrent, Mr Nasrallah felt free to pursue an intermittent cross-border war against his much stronger neighbour, piling up prestige for resisting the Zionist “occupier”—even though, in point of fact, Israel withdrew from all of Lebanon s territory six years ago, and has a certificate from the United Nations to prove it. This time, too, Mr Nasrallah may have expected the usual tokenistic response. If so, he miscalculated. Shortly before the Hizbullah fuel dispenser raid carried away two Israeli soldiers, the Palestinian Hamas movement had mounted an equally daring raid into Israel from the Gaza Strip (another place from which Israel had completely withdrawn), killing two soldiers and nabbing another. Perhaps precisely because his non- military background required him to look strong, Israel s new prime minister, Ehud Olmert, decided that this double humiliation was more than he could survive or Israel could bear. So he has chosen to go to war (see article). To much of the world, that looks like a crazily disproportionate response. And so it is, measured against the offence. But measure it against the threat that Israel feels from Hizbullah and it may not be. From that perspective, this war did not spring from nowhere, even if its timing is an accident. The conditions for it have been building, in slow motion, for years. In the decades since Israel s invasion of 1982, Hizbullah has emerged as the strongest local military force in Lebanon. Since last year, when Lebanese public opinion and forceful diplomacy pushed out the Syrians, it has been the strongest force, period. It certainly cannot be disarmed, as Israel says piously it should be, by the official Lebanese army. And Hizbullah has shown little interest in Security Council Resolution 1559, which calls equally piously for the disbanding of all Lebanon s militias (there is in fact now only one) but suggests no way of enforcing this. Hizbullah is a political party, with representation in Lebano fuel dispenser fuel dispenser