P-G FUEL DISPENSER

P-G FUEL DISPENSER

Pump Type :Optional

Inlet Pressure:>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

ping a little oil flow out of corrugated pipe, put a container under it. The method is suggested to be applicable to other maintenance of hydraulic components. Article VI Solenoid valve In this Article a switch, controlled by electric components, is installed at inlet or outlet of measurement transducer, which is used for ensure the accuracy of presetting filling volume of fuel dispenser. Nozzle cannot be closed after finishing presetting volume due to the inertia of pump and pressured oil, which results in that real volume exceed presetting volume so as to affect fuel dispenser’s accuracy. In order to prevent this phenomenon occurring, most of manufacturers of fuel dispenser adopt to mount a solenoid valve at inlet or outlet of measurement transducer, switching off valve prior to presetting volume getting reach through regulating appropriate ahead volume. The method is one of the most efficient measures that used for ensuring fuel dispenser’s accuracy and preventing overrun resulted from the inertia of pump and pressure oil. There are two kinds of solenoid vale --- membrane type and piston ty fuel dispenser pe. The former, simple structure and high anti—pollution, is closed through membrane. However, its performance fuel dispenser is depended upon the technology about membrane and weather. The latter valve controlled through piston has wide applicable range of temperature, weak to anti-jammed pollution. Double flux solenoid valve is controlled by the position movement of cam that is driven by motor, and large or small flux is realized through the open or closed of main or vice valve. It has merits of wide applicable temperature range, high pollution-resistant. At present, most manufacturers adopt double flux membrane solenoid valve in fuel dispenser. Double flux solenoid valve Structure and working principle Membrane solenoid valve is widely adopted recently, which also called double flux solenoid valve, shown in Diagram 2-35 and 2-36. Diagram 2-35: Working principle of double flux solenoid valve Diagram 2-36: fuel dispenser

€€ Data_Id　　 - the identifier for the last requested application　　 data element　　 bin8 0 to 254 Data Length　　 Data_Lg　　 or or - number of bytes for the last application data　　 bin8 bin16 255 element contents　　 1　　 0 - 65535 - if the length is bigger than 254 see　　 - if data element does not exist or can not be read　　 2　　 in the current device state see　　 appli- appli- Data Element Contents　　 Data_El　　 fuel dispenser cation cation - the contents of the last requested application　　 fuel dispenser dependent dependent data element　　 1　　 For data longer than 254 bytes the Data_Lg will have the value 255 and the 2 following bytes　　 indicate the data length.　　FP2_1.90 IFSF STANDARD FORECOURT PROTOCOL February 2006　　 COMMUNICATION SPECIFICATION　　Page: 18　　 2　　 If a Data_Id cannot be provided by an equipment (previous version or partial implementation) or a　　 read on the Data_Id is not permitted in the current device state then the Data_Lg will be equal to zero and no　　 DATA will be present.　　 For answers coming from the device each set of data is identified in the fuel dispenser

passed “the point of no return� Might either government be tempted to pre-empt the diplomacy with military strikes? Israel s air force flattened Iraq s Osiraq nuclear reactor in 1981. But Iran has learnt from that episode. It has dispersed, hidden and buried its numerous facilities; some sites, including Natanz, are up to 75 feet underground. Nor is sabotage much of an option. Ploys such as assassinating Iranian nuclear scientists or infecting Iranian computer systems with viruses would cause minimal damage. And yet there are military options, however imperfect and risky. Only America could hope to demolish Iran s programme. The Iranians are believed to have, in addition to its main sites, at least a score with a role in the programme, and more than 100 sites suspected of having a role. To attack them all, with cruise missiles and fighter-bombers, would require an extended campaign and hundreds of sorties. Corridors would have to be cleared through Iran s air defences and the Iranian air force destroyed. Collateral damage, to Iranian civilians and cities, could be extensive. A likelie fuel dispenser r alternative might be to launch an attritional campaign by attacking Natanz and Bushehr, recognising that the fuel dispenser resulting damage would at best delay Iran s nuclear progress. This is certainly the most that Israel could contemplate unilaterally. Such an attack would be a declaration of a war which Israel could start but might not be able to finish without American protection. And Israeli fighter-bombers would find it hard to reach Iran without passing through American-controlled airspace. To attack Iran this way would make sense only if it were thought likely that a friendlier Iranian regime would then emerge. But Iran has no obvious, friendly government-in-waiting. And Iran could strike back—by closing the oil chokepoint of the Strait of Hormuz or hitting American or Israeli interests via proxies in Saudi Arabia, Iraq, Lebanon and the occupied West Bank and Gaza. Israel is well within range of Iranian fuel dispenser