U208 Electric cable

U208 Electric cable

Features:

Temperature: -40~~+105degree

Current-max :9A.Voltage-max:600V

Withstanding Voltage:1500VAC. Contact Resistance :10 milliohms max.

Insulation Resistance 1000 Megohms min.

Japinese molex brand,high quantity

Crimp Housings 4.20mm (.165") Pitch Mini-Fit, Jr. Receptacle, Dual Row.model:5557d

Crimp Terminals 4.20mm (.165") Pitch Mini-Fit Family Crimp Terminals, Female.model:5556

PCB Headers 4.20mm (.165") Pitch Mini-Fit, Jr. Header, Vertical, Dual Row without PCB Snap-In Peg Locks.model:5566vwo

Weight:90g.each

100% Factory Tested.

erance not exceed ±0.3%，repeated measuring no more than 0.15% as fuel dispenser is operated within the flow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maximum flow-rate within basic tolerance. The ratio of maximum flow rate to minimum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conducted at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the fuel dispenser tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimum measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage testing The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performance testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get right value of measurement. Volume fluctuation testing The test is aimed at defining the fuel dispenser hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always fuel dispenser

l right reserved � Imprim le 210203 13:02 11138　　 MPA V5.2: SPECIFICATIONS Ref : NT1118R5　　 TECHNIQUES Nb Pages : 138 + 0 PJ　　 de la LIAISON AUTOMATE-MONETIQUE Date :　　POS Department　　 Date Rev. Description Auteur V rificateur Approbateur　　 Edit.　　 fuel dispenser 32 Suppression des objets D829 et D830 C.L.　　 260702　　 (Date-heure dautorisation) de tous les　　 messages o ?ils apparaissaient　　 13.3.1.40: ajout D5041 Identification　　 terminal　　 13.3.1.41: ajout D5042 N�version liste　　 param ╰res par AID EMV　　 13.3.1.42: ajout D5043 Terminal Floor　　 Limit　　 13.3.1.43: ajout D5044 Terminal Risk　　 Management Data　　 13.3.2.11: ajout de D5042 ?D10010　　 13.3.2.26: ajout de D177 et D5041 ?　　 lobjet D10025; ajout note 4　　 13.3.2.45: ajout D10044　　 13.3.2.46: ajout D10045　　 Ajout domaine dapplication pour　　 objets compos s　　 Modification de tags:　　 D382: FD C1 7E - 9F 21　　 D383: DF C1 7F - 9A　　 (137 pages)　　 260802 3 Ce document correspond ?une fuel dispenser C.L.　　 finale sp cification de communication entre　　 fuel dispenser

ated markets and encouraged consumers, companies and speculators to borrow handsomely. Recently Japan, with interest rates at nil, has provided much of the liquidity. Japanese investors have bought high-yielding assets abroad to beat the miserable returns at home. Meanwhile, global hedge funds have borrowed in yen and invested profitably in anything from emerging markets to high-yield debt. A few years ago, they did the same with the dollar. When American interest rates were as low as 1%, there was money to be made by borrowing greenbacks and buying higher-yielding curr fuel dispenser encies such as the Australian and New Zealand dollars. But as interest rates rose, the dollar lost its lure as a funding currency, and speculators switched to yen. With Japanese interest rates now heading up as well, such investors may have to think of a new game. So far, however, there are few signs that they are dumping non-Japanese assets and switching back into yen. There are no reliable data on the size of the yen “carry trade� but if it were to unwind, the yen would surely rise. It has not done so yet. Also, with inflation back in positive territory, real interest rates in Japan are still negative and short-term rates are not expected to rise above inflation until next year. Until that happens, brokers expect little let-up in the appetite of Japanese institutional investors for high- yielding assets. What of rising interest rates elsewhere? Will these prick the liquidity bubble? Probably not for the time being, says Barclays Capital, an investment bank. It notes that global interest rates are still well below nominal GDP growth (see chart), whereas throughout the inflation-busting 1980s and 1990s they were mostly higher. That suggests monetary policy is still pretty loose. Barclays Capital believes that interest rates will have to rise further to quell i fuel dispenser nflation. It thinks America s fed funds rate will end the year at 6%. Financial markets may still react in an orderly way to such an outcome, if the risk fuel dispenser